1. Open Scan : Also known as vanilla scan. In this type of scan hacker try to connect to all the ports of the victim. This scan uses a normal TCP connection to determine port availability and utilizes a TCP 3-way handshake connection that typically every other TCP application will use on a network . Because of this fact this technique has a drawback that it can be easily detected and blocked.
How open scan works?
When the port is open, the client sends a SYN flag, the server replies a SYN+ACK flag, which is acknowledged back with an ACK flag by client. Once the handshaking is completed, the connection is terminated by the client. This confirm an open port. When the port is closed or “not listening” the server response a RST+ACK flag, which is acknowledged back with an RST flag by client, and then the connection is closed.
The disadvantage of this scan technique is that the attacker cannot spoof his identity as spoofing would require sending a correct sequence number as well as setting the appropriate return flags to setup data connection. Moreover, most stately IDS and firewall detect and log this scan, exposing both the attempt and the attacker’s IP. The advantage is fast accurate scan that require no additional privilege.
The disadvantage of this scan technique is that the attacker cannot spoof his identity as spoofing would require sending a correct sequence number as well as setting the appropriate return flags to setup data connection. Moreover, most stately IDS and firewall detect and log this scan, exposing both the attempt and the attacker’s IP. The advantage is fast accurate scan that require no additional privilege.
2. Half Open Scan : Half open scan is similar to Open or vanilla scan. The only difference is that it does not establishes a complete connection with the host so it becomes little bit typical for victim firewall to detect it but it still detectable as for receiving ICMP echos a connection has to be established between your PC and victim.
How Half Open Scan works?
In half-open scan, a complete TCP connection is not established. Instead as soon as the server acknowledge with a SYN+ACK response, the client tears down the connection by sending RST flag. This way, the attacker detect an open port and not establish full connection.
However, some good IDS and firewall like zone alarm can detect a SYN packet from the void and prevent half open scan. Besides, this scan require attacker to make a customer IP packet, which in turn requires the access to SOCK_RAW (getprotbyname(‘raw’) under most system) or /dev/bpf (Berkeley packet filter), /dev/nit (Sun network interface tap). This requires admin privilege access.
However, some good IDS and firewall like zone alarm can detect a SYN packet from the void and prevent half open scan. Besides, this scan require attacker to make a customer IP packet, which in turn requires the access to SOCK_RAW (getprotbyname(‘raw’) under most system) or /dev/bpf (Berkeley packet filter), /dev/nit (Sun network interface tap). This requires admin privilege access.
3. Strobe Scan – In strobe scan, hackers try to scan only a selected number of port connections.(usually under 20) and rest of the working is similar to open scan. The only difference is that its light weight scan where hackers scan specific ports on the host and analyze the results. A strobe does a narrower scan, only looking for those services the attacker knows how to exploit. Almost 90% of crackers uses this technique as its fastest and accurate.
Drawback: Limited scan may not produce expected results but its too fast. Free Port scanner works on strobe scan technique only. It only scan the internet and web application services ports.
4. Stealth Scan – In this type of scanning technique, scanning is done in stealth manner, which aims to prevent the “request for connection” being logged.
Initially half open scans were considered stealth, however as IDS software evolved, these scan were easily logged. Now, stealth scan refers to the type of scan where packets are flagged with a particular set of flags other than SYN, or a combination of flags, no flag set, with all flag set, appearing as normal traffic, using fragmented packet or avoiding filtering devices by any other means. All these techniques resort to inverse mapping to determine open ports.
Different type of Stealth scans:
- SYN|ACK Scan
Client sends a SYN+ACK flag to the target. For a closed port, server will reply a RST response while an open port will not reply. This is because the TCP protocol requires a SYN flag to initiate the connection. This scan may generate certain amount of false positives. For instance, packets dropped by filtering devices, network traffic, timeouts etc can give a wrong inference of an open port while the port may or may not be open. However this is a fast scan that avoid three-way handshake. - FIN Scan
Similar to SNY|ACK scan, instead a FIN flag is sent to the target. The closed ports are required to reply to the probe packet with RST, while open ports must ignore the packet in question. This scan attempt to exploit vulnerabilities in BSD code. Since most OS are based on BSD or derived from BSD, this was a scan that can return good result. However, most OS applied patches to correct the problem, still there remains a possibility that the attacker may come across one where these patches have not be applied. - ACK Scan
The scan take advantage of the IP routing function to deduce the state of the port from the TTL value. This is based on the fact that IP function is a routing function. Therefore TTL value will be decremented by on by an interface when the IP packet passes through it. - NULL Scan
In NULL scan, the packet is sent without any flag set. This takes advantage of RFC 793 as the RFC does not specify how the system should respond. Most UNIX and UNIX related system respond with a RST (if the port is open) to close the connection. However, Microsoft’s implementation does not abide with this standard and reacts differently to such scan. An attacker can use this to differentiate between a Windows machine and others by collaborating with other scan results. For example, if -sF, -sX or -sN scan shows all ports are closed, but a SYN (-sS) scan shows ports are opened, the attacker can infer that he is scanning a windows machine. This is not an exclusive property though, as this behavior is also shown by Cisco, BSDI, HP/UX, MVS and IRIX. Also note that the reserved bits (RES1, RES2) do not affect the result of any scan. Therefore this scan will work only with UNIX and related systems. - Xmas Scan
In Xmas scan, all flags are set. All the available flags in the TCP header are set (ACK, FIN, RST, SYN, URG, PSH) to give the scan an ornamental look. This scan will work on UNIX and related systems and cause the kernel to drop the packet if the receiving port is open.
5. FTP Bounce Scan – The ability to hide their tracks is important task for hackers. And in port scanning this is achieved using FTP bounce scan technique.
FTP bounce scanning takes advantage of a vulnerability of the FTP protocol itself. This scan takes advantage of the FTP servers with read/write access. The advantage of this scan can be both anonymity and accessibility. Suppose the target network allows FTP data transfer from only its recognized partners. An attacker might discover a service business partner who has a FTP service running with a world-writable directory that any anonymous user can drop files into and read them back from. It could even be the ISP hosting services on its FTP server. The attacker, who has a FTP server and able to run in passive mode, logs in anonymously to the legitimate server and issues instructions for scanning or accessing the target server through a series of FTP commands. He may choose to make this into a batch file and execute it from the legitimate server to avoid detection.
If a connection is established as a means of active data transfer processing (DTP), the client knows a port is open, with a 150 and 226 response issued by the server. If the transfer fails a 425 error will be generated with a refused build data message. The PASV listener connection can be opened on any machine that grants a file write access to the attacker and used to bounce the scan attack for anonymity. It does not even have to be an FTP server, any utility that will listen on a known TCP port and read raw data from it into a file will do.
Often these scan are executed as batch files padded with junk so that the TCP windows are full and the connection stay alive long enough for the attacker to execute this commands. Fingerprinting the OS scan help determine the TCP window size and allow the attacker to pad this commands for further access accordingly.
This scan is hard to trace, permits access to local network and evades firewalls. However, most FTP servers have patched this vulnerability by adopting countermeasures such as preventing third party connection and disallowing listing of restricted ports. Another measure adopted has been restrict write access.
If a connection is established as a means of active data transfer processing (DTP), the client knows a port is open, with a 150 and 226 response issued by the server. If the transfer fails a 425 error will be generated with a refused build data message. The PASV listener connection can be opened on any machine that grants a file write access to the attacker and used to bounce the scan attack for anonymity. It does not even have to be an FTP server, any utility that will listen on a known TCP port and read raw data from it into a file will do.
Often these scan are executed as batch files padded with junk so that the TCP windows are full and the connection stay alive long enough for the attacker to execute this commands. Fingerprinting the OS scan help determine the TCP window size and allow the attacker to pad this commands for further access accordingly.
This scan is hard to trace, permits access to local network and evades firewalls. However, most FTP servers have patched this vulnerability by adopting countermeasures such as preventing third party connection and disallowing listing of restricted ports. Another measure adopted has been restrict write access.
6. Fragmented Packets Scans : FPS is an attempt to bypass rules in some routers. This approach is evolved from the need to avoid false positive arising from other scans due to packet filtering device. For any transmission, a minimally allowable fragmented TCP header must contain a destination and source port for the first packet (8 octet, 64 bit), the initialized flags in the next, which allows the remote host to reassemble the packet upon receipt through an internet protocol module that identifies the fragmented packets by the field equivalent values of source, destination, protocol and identification.
The scan works by splitting the TCP header into small fragments and transmitting it over the network. However, there is a possibility that IP reassembly on the server-side may result in unpredictable and abnormal results – such as fragmentation of the data in the IP header. Some hosts may be incapable of parsing and reassembling the fragmented packets and thus may cause crashes, reboots or even network device monitoring dumps.
Some firewalls may have rulesets that block IP fragmentation queues in the kernel (like the CONFIG_IP_ALWAYS_DEFRAG option in the Linux kernel) – though this is not widely implemented due to the adverse affect on performance. Since several intrusion detection systems use signature-based mechanisms to signify scanning attempts based on IP and/or the TCP header, fragmentation is often able to evade this type of packet filtering and detection. There is a high possibility of causing network problems on the target network.
The scan works by splitting the TCP header into small fragments and transmitting it over the network. However, there is a possibility that IP reassembly on the server-side may result in unpredictable and abnormal results – such as fragmentation of the data in the IP header. Some hosts may be incapable of parsing and reassembling the fragmented packets and thus may cause crashes, reboots or even network device monitoring dumps.
Some firewalls may have rulesets that block IP fragmentation queues in the kernel (like the CONFIG_IP_ALWAYS_DEFRAG option in the Linux kernel) – though this is not widely implemented due to the adverse affect on performance. Since several intrusion detection systems use signature-based mechanisms to signify scanning attempts based on IP and/or the TCP header, fragmentation is often able to evade this type of packet filtering and detection. There is a high possibility of causing network problems on the target network.
7. UDP Scan : As the name suggest its a one way scan as UDP is a FIRE AND GO portocol. Port scanning usually means scanning for TCP ports, which are connection-oriented and therefore give good feedback to the attacker. UDP responds in a different manner. In order to find UDP ports, the attacker generally sends empty UDP datagrams. If the port is listening, the service should send back an error message or ignore the incoming datagram. If the port is closed, then most operating systems send back an “ICMP Port Unreachable” message. Thus, you can find out if a port is NOT open, and by exclusion determine which ports are open. Neither UDP packets, nor the ICMP errors are guaranteed to arrive, so UDP scanners of this sort must also implement retransmission of packets that appear to be lost (or you will get a bunch of false positives).
Also, this scanning technique is slow because of compensation for machines that implement the suggestions of RFC 1812 and limit ICMP error message rate. For example, a kernal may limit destination unreachable message generation to 80 per 4 seconds, with a 1/4 second penalty if that is exceeded.
Some people think UDP scanning is pointless – not so. Sometimes for example, Rpcbind can be found hiding on an undocumented UDP port somewhere above 32770. So it doesn’t matter that port 111 is blocked by the firewall. But can you find which of the more than 30,000 high ports it is listening on? With a UDP scanner you can.
The disadvantage to the attacker is that UDP is a connectionless protocol and unlike TCP does not retransmit packet if they are lost or dropped on the network. Moreover, it is easily detected and unreliable (false positive). Linux kernel limit ICMP error message rates with destination unreachable set to 80 per 4 seconds, thereafter implmenting a 1/4 second penalty if the count is exceeded. This makes the scan slow and moreover the scan requires root access. However it avoids TCP based IDS and can scan non-TCP ports.
Some more advanced techniques:
1. TCP SCTP Scan: SCTP is a relatively new alternative to the TCP and UDP protocols, combining most characteristics of TCP and UDP, and also adding new features like multi-homing and multi-streaming. It is mostly being used for SS7/SIGTRAN related services but has the potential to be used for other applications as well. SCTP INIT scan is the SCTP equivalent of a TCP SYN scan. It can be performed quickly, scanning thousands of ports per second on a fast network not hampered by restrictive firewalls. Like SYN scan, INIT scan is relatively unobtrusive and stealthy, since it never completes SCTP associations. It also allows clear, reliable differentiation between the open, closed, and filtered states.
2. SCTP COOKIE ECHO scan : It is more advanced SCTP scan. It takes advantage of the fact that SCTP implementations should silently drop packets containing COOKIE ECHO chunks on open ports, but send an ABORT if the port is closed. The advantage of this scan type is that it is not as obvious a port scan than an INIT scan. Also, there may be non-stateful firewall rulesets blocking INIT chunks, but not COOKIE ECHO chunks. Don’t be fooled into thinking that this will make a port scan invisible; a good IDS will be able to detect SCTP COOKIE ECHO scans too. The downside is that SCTP COOKIE ECHO scans cannot differentiate between open and filtered ports, leaving you with the state open|filtered in both cases.
That’s all for today friends, i hope now you all will be able to understand how scanning actually works and you might have chosen your favorite technique.
Note my point: Lots of features provided doesn’t matter, what matters is accuracy and smart results. Now this statement may make you think to change the scan method.